manualshive.com logo in svg

Gehl Dynalift 552, Руководство оператора

Поделиться
Скачать
Gehl Dynalift 552 Скачать руководство пользователя страница 54

CHANGE HYDRAULIC RETURN
FILTER ELEMENT

This element is a cartridge type accessible from a hous-
ing on top of the hydraulic reservoir. Initial replace-
ment is after the first 100 hours. See illustration.
Remove the top cover of the housing. Remove the ele-
ment and discard. Insert the new element onto the
housing and replace the cover.

CHANGE AXLE DIFFERENTIAL
AND PLANETARY OIL

Differential

1. Remove the three drain plugs and drain out the old
oil. Replace the drain plugs (see illustration).

IMPORTANT:

DO NOT discharge oil onto

ground. Catch and dispose of per local waste dis-
posal regulations.

2. Remove the check and fill plugs. Fill the differen-
tial with oil as specified in the LUBRICATION chap-
ter. When the oil flows from the check hole, replace the
plug. Wait 10 to 15 minutes and repeat this process
until the axle is full Repeat the procedure with the
other axle.

Axle Planetary Hubs

The hubs have one plug each used for draining and fill-
ing 

(see illustration)

.

1. Position the wheel until the arrow points to the left.
Remove the drain/fill plug and allow the oil to drain
out. Replace the plug.

IMPORTANT:

DO NOT discharge oil onto

ground. Catch and dispose of per local waste dis-
posal regulations.

2. Re-position the hub so the arrow points down. Fill
with fresh oil as specified in the LUBRICATION chap-
ter. When the oil runs out, install the drain/fill plug.
Repeat this procedure on the three remaining hubs. 

CHECK EXHAUST SYSTEM

Examine the muffler and tail pipe for possible holes.
Re-tighten any loose clamps and make sure the mani-
fold outlet gasket is not leaking.

908424/AP500

52

PRINTED IN U.S.A.

PLUG IN DRAIN
POSITION.

Axle Oil Plugs Location

FILL

CHECK

DRAIN

NOTE: 

These fill/check plugs are located on the opposite

side of the differential.

FRONT AXLE SHOWN

Reservoir Filter Removal

Housing Top

Filter Element

Filter Housing

TOP OF

RESERVOIR

WARNING

When servicing the hydraulic system, lower
the boom to the ground.

Courtesy of Crane.Market 

Содержание Dynalift 552

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды