7
●
Always switch off your SG 90 E Motor Blower before refilling paint into your spray gun
paint container.
●
Never pull the connecting cable over sharp-edged objects and make sure the cable is in
perfect condition each time before using it.
●
Repairs and maintenance works, or the replacement of the power cable, should
only be carried out by authorized specialists or by us. Addresses of authorized
firms can be obtained from us or from your dealer upon request.
●
When spraying, take care not to spray in the direction of your Motor Blower.
●
Dispose of your cleaning and spraying material wastes according to the instructions
given by the relevant lacquer, paint and solvent manufacturers.
●
The air flow inside your SG 90 E Motor Blower must not be obstructed to ensure
continuous adequate cooling of the blower motor – see figure 2.
Fig.2
●
Provide the replacement of blower filter as well sealing elements in time and on
regular basis. The use of worn-out filter will lead to blower overheating. Always
check the filter state when detect overheating of the Blower. When sealing
elements are in improper state, the Blower operation will be affected, the loss of
performance would occur.
