3
80543B_MHW_GF_VEDO-TL_0109_ENG
Preliminary warnings
Read the following preliminary warnings before
installing and using the GF_VEDO TL operator
terminals. Doing so makes start-up quicker
and lets you avoid some problems that might
be mistaken for malfunctions or limitations of
the terminal.
• Immediately after unpacking the product, make a note
of the order code and the other identification data given
on the label affixed to the outside of the container and
copy them to the table below.
These details must always be kept close at hand and
referred to the personnel involved in the event of help
from Gefran Customer Service Assistance.
• Check that the terminal is in perfect condition and was
not damaged during shipment. Make sure that the pac-
kage also contains the fastening accessories and the
installation CD-ROM. Any inconsistencies, omissions or
evident signs of damage should be reported immediately
to your Gefran sales agent.
• Check that the order code corresponds with the confi-
guration requested for the application the terminal is
needed for, referring to Section: “Technical - Commercial
Information”.
Example: GF_VEDO - 104CT - VW - C1 - S1 - G
• Model: GF_VEDO 104CT
• Operating system: Vx Works
• Expansion 1: CANopen
• Expansion 2: RS232 + AUC
• Lexan: Gefran
Consult the section “Installation and Connection” before
installing the terminal on the machine control panel or
host system Consult the section “Sales Information” for
the order code. Users and/or system integrators who
want more detailed information on serial communication
between standard PCs and/or Gefran Industrial PCs
and Gefran Programmable Instruments may access the
various Technical Reference Documents in PDF format
available on Gefran’s website: www.gefran.com.
In the event of presumed instrument malfunction, before
contacting Gefran Technical Service Assistance, refer to
the Troubleshooting Guide given in Section "Maintenan-
ce", and if necessary refer to the F.A.Q. Section (Fre-
quently Asked Questions) on the Gefran Web Site
www.gefran.com
SN:
......................... (Serial no.)
CODE:
......................... (Finished product code)
TYPE:
......................... (Order Code)
SUPPLY: ......................... (Type of electrical power supply)
VERS:
......................... (Software version)
1 • PRELIMINARY INSTRUCTIONS
This section contains information and warnings of a general nature which should be read before procee-
ding with controller installation, configuration and use.
General description
The GF_VEDO TL operator terminal line is a compact
and low-cost solution for machine control.
A single product integrates machine cycle control
[SoftPLC] and graphic page display [SCADA], allowing
quick and low-cost creation of many automation solu-
tions.
The GF_VEDO TL terminals create the machine/opera-
tor interface by means of LCD monitor, touch-screen,
and a wide variety of peripheral I/Os.
GF_VEDO TL terminals are applied mainly to machine
control for packaging, metals, wood and plastic applica-
tions. This Installation Guide describes the main charac-
teristics of the operator panels and refers to the follo-
wing models:
GF_VEDO TL 65CT
Operator interface with 6.5” LCD TFT color display
GF_VEDO TL 65CK
Operator interface with 6.5” LCD TFT color display and integrated
47-key keyboard
GF_VEDO TL 104CT
Operator interface with 10.4” LCD TFT color display
GF_VEDO TL 104CK
Operator interface with 10.4” LCD TFT color display and integrated
54-key keyboard
