-999 ... +999
scale points
• Information display
5 • PROGRAMMING and CONFIGURATION
If the Inc, Dec, F keys are not pressed within 15 sec.,
the display returns to the P.V. value
I F
P.V.
Process variable
Alarm Setpoint Output 2
Alarm Setpoint Output 3
Password
C F
P A
PA = 99
P r
U.C.
User calibration
YES
NO
Alarm Setpoint Output 1
LEVEL 1 DISPLAY
Hysteresis parameters
Protection code
Information display
I F
Software version
Display of number of available
outputs
Information display
I n
Input settings
O u
Output settings
• Configuration parameters
C F
Hysteresis for set point 1
Hysteresis for set point 2
Hysteresis parameters
-999 ... +999
scale points
-999 ... +999
scale points
Hysteresis for set point 3
Device structure: identification of boards
F
Pressed for
approx. 2 sec.
S3 S1
FL1
R20
CPU BOARD + POWER
SUPPLY BOARD
OUTPUT BOARD
DISPLAY BOARD
Keep the F key
pressed to browse
the menus.
Release the F key
to enter the
displayed menu.
Press the F key to
access the
parameters.
Keep the F key
pressed to exit any
menu at any time.
S1
S3
S2
B
A
B
A
B
A
CPU BOARD + POWER
SUPPLY BOARD
OUTPUT BOARD
S1 = Status of Out 1 relay
S2 = Status of Out 2 relay
S3 = Status of Out 3 relay
A = Direct
B = Inverse
S1
S3
5V
ON OFF
12V OFF ON
24V OFF OFF
Sensor power supply
FL1, R20 on component side are to be removed to
obtain isolation in case of high voltage AC input
(*)
(*)
(*) For deviation alarms the setpoint range is -999 ... 999
3
81671B_MHW_40F96_0308_ENG