background image

Operating Frequency.................................................................................... 5 GHz

Supported resolutions...................................................................... 480p to 1080p

Video Input Connector (Sender)............................. (1) HDMI Type A, 19-pin, male

Video Output Connector (Receiver)..................... (1) HDMI Type A, 19-pin,  female

USB Connector (Sender / Receiver)......... (1) Mini-B (Receiver - factory use only)

Power Supply (Sender)..............................................(1) 5V / 1A DC with USB jack 

(can also use powered USB port)

Power Supply (Receiver)................................................................. (1) 5V / 2A DC

Power Consumption (Sender / Receiver)........................... 3W (max.) / 8W (max.)

Dimensions (W x H x D) (Sender)................................................. 1.2” x 0.6” x 3.9”

 

(29mm x 14.5mm x 98mm)

Dimensions (W x H x D) (Receiver)............................................ 5.83” x 0.8” x 3.8”

 

(148mm x 20mm x 96mm)

Shipping Weight............................................................................. 2.0 lbs. (0.9 kg)

All features and specifications are subject to change without notice.

SPECIFICATIONS

28

Содержание GTV-WHD-1080P-SR





































Отзывы: