Gefen GTV-HD-PVR, Руководство пользователя, Страница: 10 / 80

QUICK SETUP GUIDE
6
How to connect the HD-PVR:
1. Connect the HDMI OUT of the HD-PVR to the HDMI IN of your HDMI
display. Connect the S/PDIF (Coaxial) OUT to your external digital audio
amplifier/receiver, if separate digital audio output is desired.
2. Connect the HDMI, Component, Composite or S-Video input on the Gefen
HD-PVR to the output of the source device you wish to record from.
Note: If you are using DVI with a DVI-to-HDMI adapter, you may merge
external digital audio from the S/PDIF input into the HDMI signal. Simply
connect your digital audio source at the appropriate S/PDIF input jack.
Please note that this functionality is only available when using DVI. When
an HDMI input source is connected, the corresponding S/PDIF jack is
automatically deactivated since HDMI audio is present.
3. Plug the 5V power supply into the HD-PVR.
4. Turn on the display (TV), then turn on the HD-PVR by pressing the POWER
button on the supplied remote control.
The first time you turn on the power, you will be asked to set the Date and Time
on the unit (see page 9 for instructions on how to do this). Once the Date and
Time have been set, the HOME menu should be displayed.
If you are not receiving a picture on your HD display:
• Check that the power supply is plugged in and connected to the HD-PVR.
• Check that the unit is turned on. If there are lights on the front panel, then
the HD-PVR is receiving power.
• If your display has more than one HDMI IN, make sure that your display is
set up to receive signals from that input.
When the HOME menu is displayed, you can press the HOME button on the
remote control, again, to view the input source.
If the HD-PVR is unable to find a source signal, you will receive the message:
“No Signal”. If this is the case, check the following:
• Make sure that you select the correct input source on the remote control.
• Verify the connection from the input source to the HD-PVR is correct.
• Verify that your display can handle the input resolution. For example, some
displays do not support 480i. Try varying the resolution of the input source.
• The HD-PVR will not accept 1080p signals. The highest input resolution
supported by the HD-PVR is 1080i.