Gefen GTB-HD-1080PSGTB-HD-1080PS-BLK, Руководство пользователя

Страница: 10 / 55

IR REMOTE CONTROL UNIT CONFIGURATION
Setting the IR Remote Control Channel
In the event that IR commands from other remote controls interfere with the supplied IR
Remote Control unit, changing the IR channel on the IR Remote Control unit will fix the
problem. The IR Remote Control unit has a bank of DIP switches used for setting the IR
channel.
The DIP switch bank is located underneath the battery cover.
1 2 1 2
1 2 1 2
Channel 2:
Channel 0:
Default
Channel 1:
Channel 3:
Exposed DIP switch bank between the
battery slots.
It is important that the IR channel on the Remote Control unit, matches the IR channel set
on the GefenToolBox High Definition 1080p Scaler. For example, if both DIP switches on
the IR Remote Control unit are set to IR channel 0 (both DIP switches down), then the High
Definition 1080p Scaler must also be set to IR channel 0. Refer to page 15 on changing
the IR channel on the High Definition 1080p Scaler.