Gefen EXT-UHDA-HBTL-RX, Руководство пользователя

Страница: 28 / 33

28
Firmeware Update
Firmware Update
1. Over time, the Sender unit may require a firmware update to add functionality or fix
issues.
2. To perform a firmware update, a Windows PC that is running the Gefen Syner-G™
software needs to be connected to to the
RS-232 port of the Sender. Use direct RS-232
connection if your PC has a serial port. If not, use a USB-to-RS-232 adapator.
3. To update the Sender unit, the Gefen Syner-G™software will send the necessary
commands to place the product into firmware update mode. The firmware will be loaded
into the Sender from a USB thumb drive, connected to the Micro-USB
Firmware port on
the Sender’s front panel via a USB-Micro-B-male-to-USB-Type-A-female cable or adaptor
(available from major electronics stores).
4. Follow on-screen instructions in Gefen Syner-G™ to perform the firmware update.
5. Once a unit has successfully been updated, cycle the power by removing power from the
Sender unit, wait for the Power LED to deactivate, and then reconnect the power supply.