Gefen EXT-UHDA-HBTL-RX, Руководство пользователя

Страница: 16 / 33

16
Controls, Connectors, and Indicators
ID Name Description
10 Coaxial Digital Out This port provides up to 5.1 channels of
Bitstream (Dolby Digital or DTS), or Left
and Right channels of PCM digital audio
de-embedded from the HDMI signal, for
use with outboard amplification. Connect
a coaxial digital audio cable with RCA
connectors from this port to the coaxial
digital input of your amplifier or processor.
11 Optical Digital Out This port provides up to 5.1 channels of
Bitstream (Dolby Digital or DTS), or Left
and Right channels of PCM digital audio
de-embedded from the HDMI signal, for use
with outboard amplification. Connect an
optical digital audio cable with TOSLINK®
connectors from this port to the optical
digital input of your amplifier or processor.
12 HDBaseT™ Link Connector Connect a CAT-5e or better cable, up to the
recommended length for a given resolution,
from this port to the HDBaseT™ Out port on
the Sender unit.
This Receiver can send power
over the CAT-5 cable to a POH compliant
Sender unit. It can also receive power over the
CAT-5 cable from a POH compatible Sender
such as the EXT-UHDV-HBTLS-TX, but NOT
the EXT-UHDV-WP-HBTLS-TX.
13 12V DC In This power receptacle is used to connect the
included 12V DC power supply. As long as the
connected Sender is POH-compliant, it can
get power from this Receiver. Only one power
supply is required for the extender system to
operate.