page | 26
Updating the Firmware
10. Press ‘4’ on the computer keyboard. The following will be displayed:
Please send FW file for Sender 2xx MCU
Waiting for the file to be sent ... (press ‘a’ to abort)
CCCCCCCCCC
11. Begin the file transfer using the terminal program. For example, if using
Hyperterminal, click
Transfer > Send File...
12. Select the following firmware file:
FO2K4K_20xS_app_[version].bin
.
Firmware files for the Sender unit will contain the characters
10xS
and
20xS
.
13. Select the
YModem
protocol and click the
OK
button.
14. The firmware update process will begin.
15. After the process has completed, the following will be displayed. Note that the
number, next to “Size”, may vary depending upon the file:
Download Completed Successfully!
Size: 20720
16. Press ‘5’ on the computer keyboard. The following will be displayed:
Please send FW file for Sender 10x MCU
Waiting for the file to be sent ... (press ‘a’ to abort)
CCCCCCCCCC
17. Click
Transfer > Send File...
18. Select the following firmware file:
FO2K4K_10xS_app_[version].bin
.
19. Select the
YModem
protocol and click the
OK
button.
20. After the update process has completed, disconnect the USB cable from the
Sender unit.
21. Reboot the Sender unit using any one of the following methods:
a. Press ‘9’ on the computer keyboard.
b. Press the
Reset
button on the front of the unit.
c. Disconnect and reconnect the power cable from the power receptacle.
22. The Sender unit is now updated.
Appendix
Appendix
