Page Title
page | 5
Introduction
ID
Name
Description
1
RS-232
Connect an RS-232 cable from this port to
an RS-232 device. See
Using RS-232 (page
17)
for more information.
2
Fiber
Connect an SC-terminated multimode fiber
optic cable from this connector to the Fiber
connector on the Sender unit.
3
5V DC
Connect the included 5V DC power supply to
this locking power receptacle.
4
Reset
Press this button, using the end of a paper
clip or other pointed object, to power-cycle
the Receiver unit. This is the same as
disconnecting and reconnecting the power
supply.
5
P
Under normal operating conditions, this
LED indicator will glow bright blue.
See
LED Indicator Status (page 13)
for
details on LED status messages.
6
L
Under normal operating conditions, this
LED indicator will glow bright green.
See
LED Indicator Status (page 13)
for
details on LED status messages.
7
HDMI Out
Use an HDMI cable to connect an Ultra
Hi-Def display to this HDMI port.
8
USB
Used for upgrading the firmware.
See
Updating the Firmware (page 20)
for more information.
9
IR In/Ext
Connect the included IR extender to this
port. Alternatively, connect the 3.5mm
mini-stereo connector of the IR cable from
the
IR In/Ext
port to the automation system.
10
IR Out
Connect an IR emitter (Gefen part no. EXT-
IREMIT) from this jack to the IR sensor on
the source device.
Ge
tting S
tar
ted
