5
1
LED Power Indicator
This LED will become active once the included 5V DC power supply is properly
connected between the sender and an open wall power socket.
2 HDMI
Input
This input will accept one HDMI source device that will be extended to the
receiver’s location.
3
5V DC Power Receptacle
This receptacle will require power from the included 5V DC power supply for
proper operation.
4
IR Out (Blaster)
The included IR transmitter (blaster) connects to this output port. The IR
blaster’s IR emitter will need to be placed on or near the IR receiver of a device
for proper relaying of commands from the receiver.
5
Video CAT-5 Port
This port is used to connect the sending and receiving units together for Video
traffi c. Use a CAT-5, CAT-5e or CAT-6 cable. When fi eld terminating cable
please adhere to the TIA/EIA-568-B specifi cation (page 12).
6
DDC CAT-5 Port
This port is used to connect the sending and receiving units together for DDC
traffi c. Use a CAT-5, CAT-5e or CAT-6 cable. When fi eld terminating cable
please adhere to the TIA/EIA-568-B specifi cation (page 12).
SENDER PANEL DESCRIPTIONS