Gefen EXT-HDMI-CAT5-MS, Руководство пользователя, Страница: 9 / 18

6
AUTO EQUALIZATION
1. Connect the HDMI source to the HDMI CAT-5 MS Extreme sending unit’s HDMI
input port using the supplied HDMI cable.
2. Connect the HDMI CAT-5 MS Extreme sending and receiving units together
using two user supplied CAT-5, CAT-5e or CAT-6 cables.
NOTE: If fi eld terminating network cable, please adhere to the TIA/EIA568B
specifi cation. Please see page 9 for more information.
3. Connect the display to the HDMI output port of the HDMI CAT-5 MS Extreme
receiving unit using a user supplied HDMI cable.
4. Plug the 5V DC power supply into the HDMI CAT-5 MS Extreme sending unit.
NOTE: In most scenarios, the 5V DC external power supply for the receiving
unit will not be required. Operational power is supplied by the sending unit via
the connected CAT-5, CAT-5e or CAT-6 cable. If the power LED indicator on the
receiving unit is not on, please check to make sure that the RJ-45 cables are not
crossed (DDC to video and video to DDC).
5. Power on the display.
6. Power on the source.
The HDMI CAT-5 MS Extreme has built-in auto equalization that will automatically
tune out any unwanted video noise. This feature is reliable with premium cable runs
up to a maximum of 130 feet. It may be necessary to disable this feature if there is
either no video being displayed on initial start-up, there is video noise in the image,
or the cable run exceeds 130 feet. First, verify that all the proper connections have
been made and that all devices are powered on before attempting to disable auto
equalization.
CONNECTING AND OPERATING THE HDMI CAT-5 MS EXTREME