Gefen EXT-HDMI-CAT5-MS, Руководство пользователя, Страница: 5 / 18

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE HDMI CAT-5 MS EXTREME
• The HDMI CAT-5 MS Extreme units are housed in a metal box for better RF
shielding.
• Your CAT-5 cable should not exceed 300 feet.
• If you do not need DDC or HDCP data you can use a single CAT-5 cable for the
video only. The DDC will not be connected. (For further information, see our
Terminology section on page 11.) If HDCP is required, both CAT-5 cables must
be used between the sender and receiver units.
• If the source requires EDID present, you can use the Gefen HDMI Detective to
provide EDID information to your source but will not transmit HDCP.
• Shielded CAT-6 with metal RJ-45 connectors is recommended to protect from
random fl ashes caused by EMI.
• Power supply for the receiver should not be connected unless you are using one
CAT-5 or going over a distance of 200ft.
• Extensions over 130ft. require you to manually EQ your signal (see page 7).
• Extensions under 130ft. use Auto EQ (which is on by default) (see page 7).
• The extender is factory set to Auto EQ which will work for distances under 130 ft.
• This product features the option to force the output colorspace to RGB and/or use
a pre-programmed EDID. These features can be used to resolve specefi c user
issues or for troubleshooting purposes. Please see page 8 for more information.
2
OPERATION NOTES