6
SENDER PANEL DESCRIPTIONS
14 HDMI Output 3 CAT5 Extension Ports
DDC and video output ports for extension to remote receiver. Both cables
must be connected for proper operation.
15 HDMI 3 Extension Input Port
For proper extension, the supplied 1 foot HDMI jumper cable must be
attached between this port (12) and HDMI Output Port 2 (24).
16 HDMI 3 IR Blaster Port
Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR
commands from the remote receiver to the blaster for remote control of
devices.
17 HDMI Output 4 CAT5 Extension Ports
DDC and video output ports for extension to remote receiver. Both cables
must be connected for proper operation.
18 HDMI 1 Extension Input Port
For proper extension, the supplied 1 foot HDMI jumper cable must be
attached between this port (15) and HDMI Output Port 2 (24).
19 HDMI 4 IR Blaster Port
Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR
commands from the remote receiver to the blaster for remote control of
devices.
20 RS-232 Serial Control Port
Switching can be controlled via the RS-232 port. Please see page 18 for
details on the available commands and pin-outs.
21 HDMI Input 1
Connect a source device to this input.
22 HDMI Input 2
Connect a source device to this input.
23 HDMI Input 3
Connect a source device to this input.
24 HDMI Input 4
Connect a source device to this input.
25 HDMI Output 1
Connect a display to this output port. If using the built-in extension
functionality, connect this output port (22) to the HDMI 1 extension input port
(6) using the supplied 1 foot HDMI jumper cable.
