Gefen EXT-HDMI-2-COMPSVIDSN, Руководство пользователя

Страница: 5 / 18

INTRODUCTION
Congratulations on your purchase of the HDMI to Composite / S-Video Scaler. Your
complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions that
harness integration, extension, distribution and conversion technologies. Gefen’s reliable,
plug-and-play products supplement cross-platform computer systems, professional audio/
video environments and HDTV systems of all sizes with hard-working solutions that are
easy to implement and simple to operate.
The GefenTV HDMI to Composite / S-Video Scaler
Convert any Hi-Def source to standard definition NTSC/PAL format with scaling. The HDMI
to analog video scaler accommodates resolutions up to 1080p Full HD video and supports
scaled outputs in Composite and S-Video, while maintaining the original aspect ratio for
optimal viewing. The coax S/PDIF digital audio and left/right analog audio outputs allow
the audio extracted from the HDMI signal to be sent to any A/V Receiver or audio amplifier.
Underscan/Overscan and NTSC/PAL switches help assure compatibility with a variety of
analog televisions. This scaler also features a USB port for firmware upgrades.
How It Works
Using the included HDMI cable, connect the Hi-Def source to the HDMI input. Use a
composite or S-video cable to connect the scaler to the analog monitor. Connect the scaler
to an A/V Receiver or amplifier using an S/PDIF cable or an analog audio stereo patch cord
with RCA connectors. Connect the power supply to the scaler and to an available electrical
outlet. Power on all connected components. Use the NTSC/PAL switch on the scaler to
select the correct output format for your TV. Select Underscan or Overscan using the slide
switch on the scaler to compensate for scanning characteristics of your analog TV that
could result in over-cropping of the image or visible black borders.
NOTE: HDCP encrypted HDMI sources are not supported by this device. If HDCP content
is used, then the outgoing video signal will result in a black screen.
1