Gefen EXT-HDKVM-LANRX, Руководство пользователя

Страница: 35 / 168

page | 23
B
asic Oper
ation
B
asic Oper
ation
Configuring Unicast Mode
The term unicast is used to describe a configuration where information is sent from one
point to another point. It is possible to have multiple Sender and Receiver units connected
in a system. However, in unicast mode a Sender unit can communicate with only one
Receiver unit at a time. In unicast mode, the HD KVM over IP functions similiar to a HD
KVM switcher.
The illustration, below, shows 3 Sender units (S1, S2, and S3) and 2 Receiver units
(R1 and R2) on a network, operating in unicast mode. The video channels are notated
in blue.
Figure 2.1 - Unicast mode: A Sender unit can communicate with only one Receiver unit at
a time.
1. Access the Web interface for each Sender and Receiver unit that will be using
unicast
mode . In this example, we will start with Receiver unit R1.
2. Login as “Administrator”.
LAN
Receiver unit
Receiver unit
HDMI Out
HDMI Out
Sender unit
Sender unit
Sender unit
HDMI In
HDMI In
HDMI In
R
1
R
2
S
2
S
3
S
1
2
1
5
1
2
Information
The HD KVM over IP Sender and Receiver units shipped from the factory in
unicast mode
.
Tip
In unicast mode , the HD KVM over IP behaves as a HD KVM Switcher.
Unicast & Multicast Modes