Gefen EXT-DVI-2500HD, Руководство пользователя, Страница: 13 / 20

9
CONNECTING THE DVI•2500HD IN DDC MODE
1. Locate the DDC Mode switch on the front panel of the DVI•2500HD Sending
unit. Ensure that the switch is set to Direct DDC.
2. Connect a DVI cable (one is supplied) between the DVI source device’s DVI
output and the DVI•2500HD Sending unit’s DVI input.
3. Connect the DVI•2500HD Sending unit to the DVI•2500HD Receiving unit
using one of the options below:
• Single-Link Devices - Using one pair of LC terminated fiber optic cable,
connect the Sending and Receiving units together using the Channel 1
connectors.
• Dual-Link Devices - Using two pairs of LC terminated fiber optic cable,
connect the Sending and Receiving units together using both the
Channel 1 and Channel 2 connectors.
4. Connect a CAT-5e cable between the DDC ports on the DVI•2500HD
Sending and Receiving units.
5. Connect a DVI cable between the DVI•2500HD Receiving unit’s DVI output
and the DVI-capable output device’s (i.e. DVI display) DVI input.
6. Connect both of the included 12V DC power supplies between the Sending
and Receiving units and open wall power sockets.
7. Initialize (power on) the DVI-capable output device (i.e. DVI display) first,
then the DVI source device.