Gefen EXT-DVI-2500HD, Руководство пользователя, Страница: 11 / 20

7
1 LED Power Indicator
This LED will become active once the included 5V DC power supply is properly
connected between the sender and an open wall power socket.
2 Channel 2 LED Link Indicator
This LED will become active once a link for Channel 2 has been established
between the sending and receiving units.
3 Channel 1 LED Link Indicator
This LED will become active once a link for Channel 1 has been established
between the sending and receiving units.
4 12V DC Power Receptacle
This receptacle will require power from the included 12V DC power supply for
proper operation. Connect the included power supply between this port and an
open wall power socket.
5 DDC RJ45 Port
This port is used to connect a CAT-5e cable between the sending and receiving
units for DDC2B traffic. This cable is only necessary when the DVI•2500HD is
operating in Direct DDC mode.
6 DVI-D Output
This receptacle will accept either a DVI-capable Single-Link or Dual-Link output
device (i.e. DVI display).
7 2 Port LC Fiber Receptacle (Channel 1)
This receptacle will accept 1 pair, or 2 single-strand, LC terminated fiber optic
cables. This cable is required at all times for operation.
8 2 Port LC Fiber Receptacle (Channel 2)
This receptacle will accept 1 pair, or 2 single-strand, LC terminated fiber optic
cables. This cable is only required for operation when Dual-Link sources are
used.
RECEIVER PANEL DESCRIPTIONS