Gefen EXT-DV- 3600HD, Руководство пользователя, Страница: 9 / 20

5
1 Remote / Local / Console
This switch will allow the user to select which location has USB control. See
page 13 for more information.
2 EDID Prog.
This button will begin the EDID recording process for use of the Virtual DDC
mode. See page 12 for information on using the Virtual DDC feature.
3 Reset
This button is used to cycle the power off and on. In most cases this will force
the source to re-establish a link with the endpoint device. This will also force the
source to re-read the EDID.
4 SelfEDID
This LED indicator will be used when recording the EDID for the Virtual DDC
mode. See page 12 for information on using the Virtual DDC feature.
5 Local
This LED indicator will glow bright green when the USB control is set to the
Local setting (using the
Control Switch
). When this LED is active, the USB
ports located on the Sender unit will be active and the USB ports on the
Receiver unit will be disabled.
6 Ch B
This LED indicator will glow bright green when a valid optical link exists between
channel B (LC-
fi ber connectors) on the Sender unit and channel B on the
Receiver unit.
7 Status
This LED indicator will glow bright green when all devices are properly
connected and that both the Sender and Receiver unit are working properly.
8 Power
This LED indicator will glow bright red once the included 12V DC power supply
has been properly connected between the Sender unit and an available
electrical outlet.
9 Ch A
This LED indicator will glow bright green when a valid optical link exists between
channel A (LC-
fi ber connectors) on the Sender unit and channel A on the
Receiver unit. See #18.
10 12V DC
Connect the included 12V DC power supply to this power receptacle.
11 RS-232
Connects to the RS-232 control device. The
DVI 3600 HD
may be controlled
D
remotely using this port.
SENDER PANEL DESCRIPTIONS