Gefen EXT-DV- 3600HD, Руководство пользователя, Страница: 10 / 20

6
SENDER PANEL DESCRIPTIONS
12 Audio In
Connect a 3.5mm mini-stereo cable from the audio source to this jack.
13 Remote
Reserved for future use. This port is not used.
14 USB In
Use the included USB cable to connect the computer to this port. This port will
accept USB 2.0 and USB 1.1 host devices. USB devices can be connected to
the local and remote USB ports. While all ports are available for device input,
only one location, local or remote, can be active at any given time. To switch
control between locations, use the control switch located on the front panel of
the Sender unit.
15 USB Out
Connect up to two USB devices to these ports.
16 Display
Connect a local DVI display to this port. This port is always active and
duplicates the video input signal on the Sender unit. This port is also used
in the Virtual EDID Programming procedure (see page 12).
17 DVI In
Connect a DVI source to this port.
18 Optical A / B
Each channel (A and B) accepts 2 pairs of LC-terminated fi ber optic cable.
Connect each pair of LC-terminated fi ber optic cables from the Sender unit to
the Receiver unit. Make sure each pair of fi ber optic cables are connected from
the Sender unit to the corresponding LC fi ber optic connectors on the Receiver
unit.