Gefen EXT-DP-CAT7, Руководство пользователя

Страница: 11 / 24

7
INTRODUCTION
Receiver Unit Descriptions
1 Link
This LED indicator will glow bright green when the Sender and Receiver unit are
connected using two CAT-7 cables. The Sender unit must be powered.
2 DP Out
Connect a DisplayPort cable from this port to the display.
3 HPD
Press this button to cycle the HPD line on the Receiver unit.
4 EQ
Use this EQ rotary switch to adjust the quality of the output signal, based on the length
and type of CAT-7 cable that is being used. See page 12 for more information.
5 Link 1
Connect a CAT-7 cable up to 100 feet (30 meters) from this jack to the Link 1 jack
on the Receiver unit.
6 Link 2
Connect a CAT-7 cable up to 100 feet (30 meters) from this jack to the Link 2 jack
on the Receiver unit.