5
1 Power
This LED indicator will glow bright red once the included 5V DC locking power
supply is properly connected between the unit and an available electrical outlet.
2 CAT-6 / Link 1.1
Connect a CAT-6a cable between this port and the
CAT-6 / Link 1.1
port on the
Receiver unit.
3 DVI In 1
Connect a dual-link cable from this connector to the DVI (digital only) source.
4 CAT-6 / Link 1.2
Connect a CAT-6a cable between this port and the
CAT-6 / Link 1.2
port on the
Receiver unit.
5 USB In
Connect the included USB cable between this port and a computer (or other
USB host device).
6 USB Link LED
This LED indicator will glow bright green when a CAT-6a cable is connected
between the USB Link ports on both the Sender and Receiver unit.
7 USB Link
Connect a CAT-6a cable between this jack and the USB Link jack on the
Receiver unit.
8 CAT-6 / Link 2.1
Connect a CAT-6a cable between this port and the
CAT-6 / Link 2.1
port on the
Receiver unit.
9 DVI In 2
Connect a dual-link cable from this connector to the DVI (digital only) source.
10 CAT-6 / Link 2.2
Connect a CAT-6a cable between this port and the
CAT-6 / Link 2.2
port on the
Receiver unit.
11 5V DC
Connect the included 5V DC locking power supply to this receptacle.
SENDER UNIT DESCRIPTIONS
Содержание EXT-2DVI-DLKVM-CAT6
Страница 1: ...2x Dual Link DVIKVM Extender Over CAT 6a EXT 2DVI DLKVM CAT6 User Manual www gefen com...
Страница 2: ......
Страница 8: ...4 Front Panel Back Panel SENDER UNIT LAYOUT 1 2 8 9 3 4 10 11 7 6 5...
Страница 10: ...6 RECEIVER UNIT LAYOUT Front Panel Back Panel 3 1 2 4 11 9 7 12 5 6 13 14 8 10...
