Gefen EXT-2DVI-DLKVM-CAT6, Руководство пользователя

Страница: 13 / 20

9
CONNECTING THE
2X DUAL LINK DVIKVM EXTENDER OVER CAT-6A
How to Connect the 2x Dual Link DVIKVM Extender Over CAT-6a
1. Connect the included dual-link DVI cables between the DVI outputs on each
computer and the DVI In connectors on the 2x Dual Link DVIKVM Extender
Over CAT-6a Sender unit .
2. Connect the included USB cable from the computer (or other USB host
device) to the USB In port on the Sender unit.
3. Connect five CAT-6a cables between the Sender and Receiver units.
Each connector on the Sender and Receiver unit is identified as Link 1.1 ,
Link 1.2 , Link 2.1 , Link 2.2, and USB Link . When connecting the CAT-6
cables, make sure that the connectors on the Sender unit are connected to
the corresponding connectors on the Receiver unit (e.g. Link 1.1 --> Link 1.1,
Link 1.2 -> Link 1.2, USB Link --> USB Link, and so on).
4. Connect two dual-link DVI cables from the Receiver unit to each of the two
dual-link displays.
5. Connect up to four USB devices to the USB Out ports on the Receiver unit.
6. Connect the included 5V DC power supplies to the Sender and Receiver
units. Connect the AC power cord from each power supply to available
electrical outlets.
Wiring Diagram for the 2x Dual Link DVIKVM Extender Over CAT-6a
EXT-2DVI-DLKVM-CAT6
Computer
Computer
USB Mouse
USB Keyboard
USB CABLE
CAT-6 CABLE
DUAL LINK DVI CABLE
Dual Link DVI Display
2
Dual Link DVI Display
1
Receiver
Sender
NOTE: When field-terminating CAT-6a cables, follow the
TIA/EIA-568-B specification outlined on page 13.
IMPORTANT: When extending Dual Link resolutions, both CAT-6a
cables must be exactly the same length.