background image

page | 65

B

asic Oper

ation

B

asic Oper

ation

The Web Interface

• 

Administrator

 

The Administrator username provides full access to all features 

within the web interface. 

 

The default password for the Administrator user name is 

Admin

All passwords are case-sensitive.  For information on changing 

the default password, see 

Configuring Network Settings (page 92)

5.  Enter the password for the selected username.

6.  Click the 

Login

 button.

7.  Ater a few moments, the 

Routing

 tab will be displayed. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Administrator vs Operator 

 

As mentioned earlier, logging in as 

Operator

 provides restricted access to many 

of the available features within the web interface.  This is summarized in the table 

below: 

 

Administrator

Operator

• 

Access to all features

• 

Access to 

Routing

 and 

Status

 

tabs, only. 

• 

No access to the 

Preset Edit

 

button under the 

Routing

 tab.

Содержание 4K ULTRAHD EXT-UHD-88













































































































































































































Отзывы: