manualshive.com logo in svg

Gefen TOOLBOX GTB-MINI-PACS, Руководство пользователя

Поделиться
Скачать
Gefen TOOLBOX GTB-MINI-PACS Скачать руководство пользователя страница 6

2

READ THESE NOTES BEFORE INSTALLING OR OPERATING

 THE PROFESSIONAL AUTOMATION CONTROL SYSTEM

• 

The Mini PACS is shipped with a static IP address of 

192.168.1.72

.  This 

address may need to be changed before the Mini PACS will work on your 
Local Area Network. See page 7 for instructions on setting the Mini PACS to 
a new IP address.

• If your network will contain multiple Mini PACS and/or PACS units, each one

must have a unique IP address before it is connected to the network.  Install
one Mini PACS at a time, and change its IP address before connecting 
another Mini PACS or PACS to the network.

• 

As the Mini PACS is programmed, you can download the confi guration and
IR fi les to your computer or an external storage device.  We recommend that
you back up fi les frequently during programming, and save IR fi les for each
device as it is learned.  These fi les can be transferred to another Mini PACS 
or PACS for future projects.

• 

RS-232 commands are not stored in the Mini PACS.  Only the confi guration
data is stored.  The Mini PACS acts as a bridge between your controller that 
is sending the RS-232 commands over your network, and the actual RS-232
port on the device that is being controlled.

• 

Mini PACS allows control to be distributed throughout your system.  Multiple
Mini PACS devices may be installed close to the devices being controlled,
rather than near the system controller, to minimize cabling and improve
reliability.

RS-232 Port Wiring Diagram

OPERATION NOTES

5 4 3 2 1

9 8 7 6

1 2 3 4 5

6 7 8 9

Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface

Содержание GTB-MINI-PACS

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды