Gefen TOOLBOX GTB-MINI-PACS, Руководство пользователя

Страница: 32 / 88

28
WEB INTERFACE
12. If the commands match, the Mini PACS will prompt you for the next
Command in the list.
13. If you are prompted for a command that does not exist on your remote,
you can press the “ SKIP Command ” button, and you will be prompted for
the next button on the list, or you can press “ EXIT IR Learning ” to end the
process. If you start the Learn ALL process again, it will start with the fi rst
un-learned command, and skip any commands that have previously been
learned.
14. Learn each command in turn until all have been learned.
15. The learned command will now be green. Any commands that were skipped
or not learned successfully will still be yellow.
16. You can manually add any commands that were not in the template
afterwards. Since commands are accessed by name, and not by number,
the sequence of learning commands is not critical. Commands that are
in the Template cannot be re-named. They can be deleted, and then new
commands may be added at the bottom after saving the changes. There is
a maximum of 64 commands per device, so you may need to delete some
unused commands to create room for any new ones.
17. Press “ Test ” to verify that each command performs as expected.
AUTO IR Learning MODE Enabled:
Please have your remote control and get ready to press the remote key for 3
Please press the 3 button.