10
DIP SWITCH CONFIGURATION
Sender Unit
The GefenPRO Extender for HDMI ELR with PoL 2 over CAT5 contains DIP
switches on the bottom of the Sender Unit. Each DIP switch performs a different
function.
•
•
•
•
•
DIP Switch 1 - Green Mode (Default = ON)
• OFF
- Enable Green Mode
When DIP switch 1 on the Sender Unt is set to the OFF position, the Sender
Unit is placed in Green Mode. In this mode, the unit is not powered unless
+5V is detected on pin 18 of the HDMI cable. Green Mode consumes less
than 1 Watt of power.
• ON
- Disable Green Mode
If DIP switch 1 is set to the ON position, then the Sender Unit is always
powered.
Two DIP switches located on
the bottom of the Sender Unit.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Both the Sender Unit and Receiver Unit must be placed in Green
Mode in order to use the Green Mode feature.
