8
CONNECTING THE EXTENDER
FOR HDMI ELR WITH POL 2 OVER CAT5
1.
Connect the Hi-Def source to the Sender Unit using the included HDMI cable.
2.
Optionally connect a secondary Hi-Def source to the Receiver Unit.
Connecting a secondary Hi-Def source to the Receiver Unit provides the ability
to switch between the a Hi-Def source connected to the Sender Unit and the Hi-
Def source connected to the Receiver Unit. In this way, the Extender for HDMI
ELR with PoL 2 over CAT5 functions as both a 2x1 switcher and an extender.
3. Use an HDMI cable to connect the HDTV display to the Receiver Unit.
4. Connect the Ethernet device/router to the Ethernet input port on the Sender
unit using a CAT-5, CAT-5e or CAT-6 cable. Connect the Ethernet output port
on the Receiver Unit to the remote device/router with a CAT-5, CAT-5e or
CAT-6 cable.
5. Use a CAT-5 or CAT-6 cable up to 330 ft (100 meters) to connect the Link
ports on both the Sender Unit and Receiver Unit.
If terminating network cables in the fi eld, please adhere to the
TIA/EIA568B specifi cation. See page 15 for details.
6. Connect the included AC power cord to the Sender Unit Plug the power cord
into an available electrical outlet.
Connect an optional power cable (CAB-PWR-06LL or
CAB-PWR-06NL) to the Receiver Unit. The Receiver Unit supplies
5 V DC (@ 2A) to power an additional device.
7.
Power on the HDTV display and the Hi-Def source(s) connected to the Sender
Unit and the Receiver Unit.
