8 - TELEPHONE OPERATION
- Ensure that the telephone has been set up in
accordance with the telephone userguide and
has been connected as shown in the installation
section.
- Select the ringer On/Off switch on the A+T or T
position for the ring.
- Choose which of the alarm modes you wish to
alert you of your incoming telephone calls (see
page 6 : V, V+S, S+F or F+V).
- When the alarm mode selected indicates there
is an incoming telephone call, lift the telephone
handset and answer the call. When you have
finished the call replace the handset and the
alarm will be ready to indicate the next call.
9 - DIMMER SWITCH (
)
Adjust the brightness of the display by moving
the
control at the rear of your Wake n
Shake GTI.
10 - VOLUME (VOLUME)
Sets the volume of the ring and the alarm sound.
8
