3
V200 Smart Door Lock User Manual | Homelock
Password, effectively prevent many peers when the password embarrassment;
■
Dual verification mode: fingerprint, password and card can be set in pairs to
verify unlocking, only after setting
There are two users at the same time verification can open the door, suitable for
special occasions;
■
User management: administrator enjoys the highest authority (ordinary users can
only open and close the door operation), can
edit se ng the lock, the number of administrators is 9 (can be fingerprint, password,
card), the total capacity is 300pcs;
■
Alarm function: The machine has anti-warping alarm, low pressure alarm, trial
and error alarm;
■
Standby power supply: when the ba ery runs out, use 5V mobile power supply
to emergency power supply for the door lock;
Notes:
1. When fingerprint collec on, finger strength is moderate, do not vigorously
pressure, to prevent the fingerprint collection head scratch;
2. Ba ery use me should not be too long, it is generally recommended to charge
at least 3 months, otherwise ba ery leakage will damage the smart lock;
3. The lock use 8.4V high performance lithium ba ery, when the first prompt "low
power, please replace the battery", according to different battery capacity, can also
open the door about 100
mes, at this
me should be charged in
me
4. Fingerprint/card/password input error 5 mes in total a er the alarm, the
device sounds alarm, the door lock can not be used within 90 seconds;
■
Initialization operation: use the card needle, press the hole in the middle of the
rear panel lock/lock bu on, hold for 5 seconds, the voice prompt "ini aliza on
successful", the factory engineering password is "123456",then you can open the
door, after entering the administrator information, the engineering password
"123456" will be automa cally deleted
