Geeetech BIBER, Инструкция по сборке

Страница: 7 / 27

7
a. Arrange 2A, 2B, 2C, 2D, 2E, 2F in the right order;
b. Put 2A, 2B and 2C together (Make reference to the assembly video);
c. Join 2D together with 2A, 2B and 2C;
d. Embed 2F --- the acrylic plate (with the logo “BIBER”) into the small
hole in 2D;
e. Then join 2E and the rest of the storage chest together;
f. Tighten the chest with 2x16mm screws and 2 square nuts on the side of
2D and 2E;
g. In the end, your storage chest is nicely done. This little chest will
accommodate your small mouse, LED lights, a yellow bread board,
jumper wires and some other parts.