Geeetech BIBER, Инструкция по сборке

Страница: 3 / 27

3
About the Biber Computer Kit
Biber is a computer kit for kids to assemble themselves, move on through
Raspberry Pi story series and accumulate knowledge in physical engineering and
electronics in the game.
Preparation
1. Unpack the kit and check to make sure that all the parts are complete and in
good condition, since there might be some damage during shipping. To help
you with this, there is a BOM in the box and each part has been labeled
according the building procedures.
2. Please contact with our customer service straight away, provide us the NO. ,
Name, and Qty, if you find any missing or damaged parts.
3. Read through the whole building process to gain an over-all idea of what
is involved and how long it might take to finish the assembly, before you
start on the work described. Or you can watch the assembly video
HERE.
4. Before your assembly work, it is advisable to put all the parts in order
according to the building instruction. Do not mix them up. In this way, you
will find the whole building task interesting, time-saving and worthy of your
exploration.
5. The Biber computer kit is recommended for kids aged 8-12. This kit contains
tiny parts; please keep them away from kids under 3.
6. Work on a clean and dry table.
7. Ask for help should you run into any problems and we will always try our
best to find the suitable solution for you.
8. If you find any problem about the videos, such as the part number is wrong,
please refer to this building instruction. Videos are just for reference, and we
may do some tiny changes.