Page 14 (Revision 1.0) Copyright © 2018 GeeTramp® All Rights Reserved.
JUMPING MAT & SAFETY PAD WITH PROTECTION BARRIER (CONT.)
Step 3.6
Now the jumping mat
and the safety pad’s
protection barrier are fully secured you may now
secure the safety pads to the jumping mat and
frame with the included bungee cords.
Thread the bungee through the pad underside black
hoop. Work the head of the bungee cord so it aligns
in-between the two spring V rings. Complete all pad
inner attachment points
Step 3.7
Lift the outside of the safety pads and locate the
brass eyelets. Pinch the eyelet area so the eyelet
holes line up. The bungee cord can then be
threaded through.
Step 3.8
Once the bungee cord is through the brass eyelets,
loop the bungee cord around the main frame as
shown. Rotate it around, so it
’s repositioned
so the
head is on the inside of the frame.
Repeat this step until all bungee cords are installed.
Note: The safety integrity for the user is dependent on the safety pads remaining correctly positioned
over the frame. It is strongly advised to check the position of the safety pads before using the Mini
Tramp each time.
