4 x Star Pickets (A)
4 x Ratchet Straps (C)
Ensure the trampoline is in the desired location and is on level ground.
Measure and place the star picket approximately 300-350mm inwards of the trampoline frame
to prevent tipping hazards. Place the rest of the star pickets (A) evenly spaced around the frame
to share the wind load.
Tip:
If possible align the star pickets as close as you can with the strong
vertical zones of the legs.
Copyright © 2021 GeeTramp® All Rights Reserved.
Page 2 (Revision 3.0)
Place the Star Picket (A) on a slight angle, leaning inward with the top hole facing outwards as
shown below.
4 x Caps (B)
4 x Top Straps (D)
