geda grill
Use the temperature dial to set desired temperature of the grill. At the end of the Startup Cycle, the
grill will automatically begin its Running Cycle.
The motor, fan and hot rod are will run according to set temperature.
Running Cycle
Fan is always on, auger is running in algorithm of PID according to set temperature, hot rod is
deactivated)
The display will show the actual temperature inside the grill and the probe temperature in P1 and/or
P2 if probes are connected at all times.
Automatic Re-Light
At any time during operation, would the grill temperature drop below 55°C for 10 minutes, the
Digital Control Center will activate the Automatic Re-Light mode. This mode will re-activate the
Startup Cycle, and all its features.
If it fails, the display will show “Er3”.
The “Re-Light” mode aids in ensuring that a small fire is maintained during use in lower temperatures.
It also helps to re-light a fire that may have gone out when going from an extremely HIGH
temperature to LOW temperature. If it fails to ignite, the display will show Er3.
Shutdown Cycle
If the ON/OFF button is pressed down for 3 seconds the grill will activate its
Shutdown Cycle. The fan will be kept on to let the fire burn out and to cool down
the grill. After 5 minutes the grill control system will do an automatic temperature
check. If the temperature is below 55
°C the grill fan will stop and the grill will shut
down completely.
During the Shutdown Cycle - the display, Auger motor and Hot rod will be OFF.
Fan will be ON.
Err Information
1.
Er1:
Grill RTD fails to connect to the control board.
2.
Er2:
Startup Cycle fails.
3.
Er3:
Auto re-light fails.
4.
ErH:
The temperature inside the grill exceeds 315
°C.
Содержание Odin 65
Страница 1: ...geda grill USER S MANUAL Odin 65...
Страница 4: ...geda grill Grill parts...
