GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Maintenance - Checking - Cleaning
BL068 GB Edition 03/2015
63 / 90
Assembly and Operating Manual
8
Maintenance - Checking - Cleaning
WARNING
The entire manual and operating manual must be read for all mainte-
nance / servicing tasks.
It is not permitted to carry out tasks if the type and scope of the tasks
are unclear, or the resulting hazards and actions to be initiated to
avert hazards are unclear. All unclear issues must be resolved before
starting work. All safety instructions must be complied with.
Workshop equipment
that is suitable for the specific work is impera-
tive for carrying out
servicing and maintenance tasks
. When carrying
out maintenance tasks at greater height, fall protection must be worn!
Keep all handles, railings and the ground free from dirt and contamina-
tion.
8.1
Inspections
Inspections before commissioning, recurring inspections and in-
termediate inspections must be carried out according to national
regulations.
During the checks, the condition, presence and function of all safety-
related features of the machine are checked using appropriate proce-
dures. Appropriate procedures are:
•
Visual inspections
•
Function and efficacy checks
•
Checks using measurement and test equipment
For each test, the scope of the test, type of test and the execution of the
test by competent persons must be defined by the operating company.
Type of test
Inspection procedures
Check by a trained person
Basic visual inspection and function check
with few test steps and simple evaluation
Check by a competent person
Reoccurring inspections
Checking due to special events, e.g.
-
Assembly
-
Maintenance
-
Natural phenomena
Checking by an accredited inspec-
tion body (technical specialist)
Checking in accordance with national regula-
tions
