GA03HA-01
User Manual
PPUH „GECO” Sp. z o.o.
Page
7 Edition I
Valid from 2017-07-26
3.
Location and installation
The panel is designed to be wall mounted, using the mounting frame. The frame must be screwed to the
wall, and then the panel can be snapped into the frame. Please note that the panel must be installed in a
position which will allow a temperature reading applicable to the entire area to be heated.
Fig. 1
Examples of correct and incorrect locations for the GA03HA room panel
Installing the GA03HA-01 room panel on the wall
Step 1
Step 2
Step 3
Fit the installation frame to the
wall
(‘Do Góry’ on the inside of the
frame indicates the top)
Connect the transmission cable to the
panel, according to Fig.2
Snap the room panel into
place on the installation
frame
Installing the panel close to windows, radiators, or in places
exposed to strong sunlight or draughts will result in
inaccurate readings.
