GA03HA-01
User Manual
PPUH „GECO” Sp. z o.o.
Page
12 Edition I
Valid from 2017-07-26
Press the button
to return to the previous screen.
Exit to the main screen by pressing the button
.
6.2.2.
Change work mode
Use this button
to change the controller work mode. Access to work mode changes is also possible
via the menu (1.3).
If the controller was already in automatic mode, it goes to manual mode. This is indicated by displaying a
constant temperature on the main screen. The programme number disappears and the hourly heating cycle is
not distinguished (the bar at the bottom of the screen indicates the heating cycle).
If the controller is already in manual mode, it enters automatic mode. This is indicated by displaying two
temperatures: "day" and "night". Hourly heating cycles (on the bar at the bottom of the screen) and
programme number are indicated.
It is possible to edit selected temperatures in both automatic and manual modes, using the buttons
and
. Changes do not need to be confirmed.
emergency work
Work mode:
Summer/winter
On/off
Anti-Legionella
Boiler extinguished
detection
Connection
Feeder overheating
Description of chosen
Daytime mode is
set
Night time mode
is set
