25
Diagnostic Mode
Press on the Diagnostic key to start a BromiCharge
concentration level test to exit diagnostic mode
press on the Diagnostic key again the system will
automatically exit after 15 minutes
In diagnostic mode, the BromiCharge gauge indicates
the approximate level of BromiCharge in the spa water
Do not add BromiCharge if the indicator is in the
green zone
When BromiCharge is added the indicator will move
slowly to the right When water is added to the spa the
indicator will move to the left to obtain a good level
of BromiCharge, start the pumps and add the specified
amount of BromiCharge** and allow 5 minutes for the
indicator to adjust before adding more
For optimal performance, aim for the middle of the
green zone
** For more information on adjusting your BromiCharge level see the inclear user
manual
Power
Boost activation/deactivation
Boost adjustment
Mode
Press on the Mode key to access your in.clear module.
this menu allows you to activate or deactivate your
inclear, to start or stop a Boost, and to enter diagnostic
mode
Turning the in.clear on/off
Press the power key to turn the inclear on or off
Control the Boost level
Press on the Boost activation/deactivation key to start a
Boost, and again to cancel
to adjust the Boost level use the arrow keys *
A message indicating that Boost mode is active is
displayed at the bottom of the main screen for the
duration of the Boost
* See the inclear user manual for more details about Boost levels
Diagnostic
this menu is only available if an inclear linked is detected
Keypad functions
in.clear functions
