12
Water temperature
the temperature shown at the bottom of the screen
gives the actual water temperature use the up and
Down keys to set the desired temperature the set
point will appear in blue After 3 seconds without any
change to the set temperature value, the current water
temperature will reappear
When the set value is lower than the current temperature
Cooling to xx.x
will appear below When the set value is
higher than the current temperature,
Heating to xx.x
will
be indicated under the value Normally there is a short
delay before the heating starts, during which
Heating
Suspended
is indicated under the value
Settings
From the home page you can access the
Settings
,
where you will find:
•
Water care
•
Audio
•
in.clear-200 (linked version)
•
Maintenance
•
Date and time
•
Keypad Settings
•
Wi-Fi (only available on in.touch with software
11.00 or higher)
•
Electrical configuration
•
Factory reset
•
About
use the arrow keys to move up and down in the list
to select an option, press the lit button beside it (key 2)
At any point you can press the Settings button to return
to the home screen or key 1 to go back
Keypad functions
