in.tune panel housing
in.tune panel housing
Step 1
Using the drilling template supplied with the unit, determine the
mounting location and then stick the template on the location.
Mounting surface
Template
Once the desired location is established, place guide template and
with a hole saw, drill a starter hole at the outline of the template.
With a jigsaw, cut all around the edges of the template.
Then drill six
1/8
" (3 mm) mounting holes in the exact position
according to the drilling template.
Safety:
Protective eyewear should be worn by anyone operating
equipment used in the installation of the in.tune mounting bezel.
10
1/2
"
5
3/4
"
��
���
�
�������
���
���
�
�������
Installation instructions
