in.tune panel housing
in.tune panel housing
Warning
Introduction
The in.tune panel housing is a 30° embedded fitting designed to
facilitate the installation of the in.tune player onto a spa panel.
When properly installed, this UL approved bezel system helps
to protect the in.tune player specially through packaging and
transportation of the spa. Made of durable and lightweight plastic,
the in.tune panel housing adds mounting flexibility, ease of use and
better view angle.
WARNING
Before installing or connecting the unit,
please read the following.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
DO NOT USE FOAM TO ISOLATE THE UNIT.
Doing so may cause heat to build up inside and may result in fire.
INSTALL UNIT 1" AWAY FROM OTHER SURFACES.
Make sure to leave a clearance of at least 1" from other surfaces.
FAILURE TO APPLY SILICONE MAY DAMAGE THE UNIT
AND SURROUNDING EQUIPMENT.
THE IN.TUNE MUST ALWAYS BE INSTALLED WITH THE
MOUNTING STRAP FIRMLY FIXED TO A SOLID PART.
Failure to do so may result in damage to the unit and annulment of
the warranty.
PRECAUTIONS
Accessory parts
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage the in.tune player internally or
may not securely install the unit in place. This may cause parts to
become loose resulting in hazards or product failure.
