COPY BUTTON:
In order to copy the programme of the day you have just
programmed for other days, press and hold the COPY button
for two seconds.
The word COPY appears on the display and the cursor blinks
on the day for which you want to copy the programme.
Use the
+h
or
-h
buttons to scroll through the days of the week
and press the COPY button to confirm the day for which you
want to copy the programme.
To exit the COPY function, simply wait a few seconds without
pressing any of the buttons.
After programming the entire week, you need to update the
time and date by pressing the SET button with a pointed tool.
(Fig.14).
SET BUTTON:
Use the SET button to update the HOUR, MINUTES and DATE.
The HOUR starts blinking when you press the SET button.
Use the
+°C
and
-°C
buttons to set the current TIME. Press the
+h
button to move to the MINUTES, which will start blinking.
Use the
+°C
and
-°C
buttons to set the MINUTES.
Press the
+h
button to move to the DAY, which will start blinking.
Use the
+°C
and
-°C
buttons to set the DAY.
The
Easy Radio
is now ready for normal operation, and the
flame symbol will appear on the display (Fig. 14) whenever a
load (heating or air-conditioning) is activated.
MANUAL OPERATION
Press the AUT/MAN (Fig. 14) to select manual mode. The
graph (still saved in the memory) is replaced by the “hand”
symbol (Fig. 14).
The
Easy Radio
now acts as a simple ambient thermostat
and you can set the temperature with the
+°C
and
-°C
buttons
(O, P in Fig.14). The set temperature, shown on the display, is
maintained until you exit manual mode by pressing the AUT/
MAN again (to enter automatic mode).
OFF BUTTON
Press the button (R in Fig.14) for two seconds to turn off the
chronothermostat. The
Easy Radio
deactivates the functions of
the set programmes (still saved in the memory) and displays, in
alternation, the word OFF and the current time or temperature
reading.
Press the
°C/h
button if you want to view the TIME instead of
the temperature.
The ANTIFREEZE FUNCTION remains active when the
chronothermostat is off. If the ambient temperature falls below
7 °C
(7°C – 0.2°C=6.8°C), the unit activates the system to keep
circulating the water, preventing it from freezing in the pipes.
PROGRAMME RESET FUNCTION
If you need to cancel a programme you have entered (e.g. after
a programming test), press the
AUT/MAN
and
COPY
buttons
(T and H in Fig. 14) at the same time for about two seconds;
Easy Radio
restarts initialisation as described previously.
QUALITY OF THE RADIO SIGNAL
The GREEN LED on the RECEIVER indicates the
QUALITY
of the
RADIO SIGNAL
for two minutes whenever the receiver
receives a radio signal from the TRANSMITTER.
The
GREEN LED
on the RECEIVER / BRIDGE remains
steady or blinks for about 2 minutes, depending on the
QUALITY
of the
RADIO SIGNAL
received.
The
QUALITY
of the
RADIO SIGNAL
varies according to
the distance between the
TRANSMITTER
and the
BRIDGE/
RECEIVER
and the degree of interference.
-
Steady GREEN LED
: The QUALITY of the signal is
EXCELLENT (distance of 0-40m).
-
Fast blinking GREEN LED
: The QUALITY of the signal is
GOOD (distance of 0-65m).
-
Slow blinking GREEN LED
: The QUALITY of the signal is
SUFFICIENT (distance of 0-85m)
-
GREEN LED off
: The QUALITY of the signal is INSUFFICIENT
(distance of more than 100m).
BARRIERS
The quality of the
Radio signal
received by the
RECEIVER
varies according to the nature of the walls.
Cavity brick wall
RECEIVER
JP1
: (A-B) e (E-F)
Reinforced concrete
wall
F1 F2
RECEIVER
JP1
: (A-B) e (E-F)
F1 F2
TERMS OF THE GUARANTEE
THIS CERTIFICATE IS THE SOLE DOCUMENT
ENTITLING THE USER TO REPAIR OF THE PRODUCT
UNDER THE TERMS OF THE GUARANTEE
- The GUARANTEE is valid for a period of 24 months from the
date of purchase.
- The GUARANTEE does not cover damage attributable to
tampering and incorrect or improper use and installation.
- The GUARANTEE is valid only when it has been duly filled in.
- In the case of defects covered by the GUARANTEE, the
manufacturer shall repair or replace the product free of
charge.
AFTER THE GUARANTEE PERIOD:
When the GUARANTEE expires, the user is billed for the cost
of replacements and manual labour.
