Continuous loop recording Seamless loop recording, no leakage seconds
USB
1: USB-Disk
2: PC-Camera
Truck switch
Support auto ignition on, turn off
Power
supply
interface
5V 1A
Motion detection
Support
Battery
Batt-in300mAh
Troubleshooting
Under normal operating conditions, such as abnormal products, please refer to the solution:
Unable to boot:
Check the recorder and car charger connected correctly, if you manually turned on, check the battery level is too low needs
recharging As a result of procedural questions by pressing the RESET Reset button to restore to factory settings.
When the camera automatically stops recording, or do not cycle the camera:
Due to the huge high-definition video data, it is possible because the memory card reader could not keep pace Please use
the high-speed TF card, such as C10 high speed card.
Not cycle the camera is also possible that gravity sensor opens, the memory card are all locked files causing. Please gravity
sensor is closed, and the memory card is formatted.
Each time the camera and set the cycle is not the same:
Check to see if motion detection function, because the camera motion detection state length of time, depending on the
screen there is no movement.
Shoot the movie is not clear:
Please check whether the stolen camera, finger print. Please clean the lens before shooting the surface, keep the lens clean.
Sometimes when the effect of the film shoot bad thing:
Camera effects and lighting conditions to shoot a great relationship, such as backlighting, shun the light, the intensity of
light, and this will result in different shooting out of the video.
Images have streaks interference:
This is due to the wrong setting " light frequency" produced under the fluorescent lights, the domestic flat rate "50HZ".
When the machine
When the machine briefly press the "RESET" the reset button to restore restart.
