Geberit Preda 116.085.00.1, Руководство по эксплуатации

Страница: 7 / 48

EN
Troubleshooting
Malfunction Cause Action
Incorrect flushes (too soon, too late,
unwanted)
Detection distance
not set correctly ▶ Optimise the detection
distance.
IR window is dirty or
wet
▶ Clean or dry the IR window.
IR window scratched ▶ Contact a skilled person.
Water is running continuously into
the urinal ceramic.
Software fault
▶ Restart the urinal flush
control.
Technical fault ▶ Contact a skilled person.
Flushing out of the urinal ceramic is
inadequate. Flush time set incor-
rectly
▶ Set flush time.
Flush volume is inadequate.
Basket filter in
solenoid valve
blocked
▶ Clean the basket filter.
Battery warning level 1
(4 short signal tones upon entering
the detection range)
Batteries dead ▶ Replace the batteries.
Battery warning level 2
(no flush actuation, 2 short signal
tones every 30 seconds)
Battery warning level 3
(no flush actuation, no signal tone)
No flush actuation Network failure ▶ Check the power supply.
7021420811-1 © 01-2020
969.653.00.0(00)
7