Geberit Galvano Duofix, Руководство по эксплуатации

Страница: 14 / 56

EN
14
B1256-001 © 08-2015
966.921.00.0 (00)
Maintenance
Structure of this document
Illustrations for this chapter are shown at
the end of this document. References to the
corresponding illustration sequences are
shown as follows:
Maintenance interval
The following maintenance work is required
as necessary or at the specified intervals at
the latest:
Setting the flush time
1
Activate programming mode.
Remove the urinal ceramic.
Press the button once.
Result
LED flashes quickly, flush control is
deactivated.
Press and hold the button for
4 seconds.
Result
LED flashes slowly, flush control is in
programming mode.
2
Press the button and release after
the desired number of flash pulses.
One flash pulse corresponds to a
flush time of 1 second.
Result
New flush time is set.
LED flashes quickly after 2 seconds.
Flush control is deactivated again.
3
Activate flush control.
Press the button once.
Result
LED lights up continuously, flush
control is activated.
Install the urinal ceramic.
Testing the flush actuation
1
Test the flush actuation.
Pour 0.5 litres of body-temperature
water into the urinal ceramic.
Result
Flush is actuated.
Maintenance Interval
Clean the urinal
ceramic Daily
Have the basket filter
cleaned by a skilled
person At least every
2 years