GeBe GPT-4454, Руководство пользователя, Страница: 4 / 25

Description 4
GeBE E + F GmbH • www.gebe.net • GeBE Dok.Nr.: SMAN-E-510-V1.5 Thermal Printer GPT-4454
2 Description
The GPT-4454 is an industrial printer for installation in
a robust plastic housing reinforced with fiber glass.
The foil on the operating console can be printed with
a custom design.
Due to the extended temperature range of -10 to +60
°C, MAXI MULDE is ideal for outdoor applications.
Easy paper roll exchange due to Easy Paper Loading
technology. The paper supply lid closes securely shut
(tested in accordance with DIN EN60068-2-6 vibrati-
ons, and -27 shock).
A convenient OnPaperDisplay menu (OPD-Menue
®
)
replaces the earlier configurating of the printer
through DIP switches
.
Besides wireless interfaces such as Bluetooth
®
, IrDA,
or GeBE-Ir, MAXI MULDE can also be controlled
through a RS232 or USB interface.
The printer can be equipped with a battery charging
circuit for 5 NiMH cells or 2 Li-Ion cells. Charging will
take about 4 hours.
Intelligent power management increases the operatio-
nal readiness. The printer can switch to a sleep mode
that will still allow it to receive data. In sleep mode,
the power consumption can be lower at times than
the self-discharge of the battery.
The alarm timer of the optional real time clock of the
MAXI MULDE wakes up the printer at the program-
med time to perform a previously defined action.
The GPT-4454 is also available with a 3-track mag-
netic card reader and/or a paper rewinder.
3
15
2
1
*) applies to te whole document: features depending on
the printer version (GPT-4454)
Parts and Functions of the Printer
*)
1 opening lever for paper supply lid (LEVER)
2 paper supply lid
3 button {OFF/NEXT}
4 button {SET} currently without function
5 button {FEED/ENTER}
6 LED "STATUS" (green/red)
7 LED "communication" (red)
8 Window for IR transmitter/receiver
9 sleep jumper of DC/DC version
10 power supply: 10-18 / 18-36V Phoenix connector
11 serial interface RS232 (3 different types)
12 power supply 4.5 - 8.5 VDC or
battery plug connection
13 connector for charger
14 SPI Bus connector
15 USB connector
16 rewinder
17 IrdA external transmitter/receiver
3 Packing List
Please check during the unpacking process, if all parts have been delivered completely and undamaged.
Make sure to remove all parts from the packaging. Claims for damages caused during transport can only be asser-
ted, if the carrier is informed without delay. Please prepare a survey report and send it back to the supplier along
with the damaged part.
Standard Versions of the Thermal Printers
The OEM printers of the MAXI MULDE series do not include any accessories.
Please order accessories separately according to the table in the chapter "Parts and Accessories" on page 21.
15
10
5
6
8
17
9 11
15
9
12
14 14
4
13 11