Layout and Functions
6
GeBE E + F GmbH • www.gebe.net • GeBE Doc. No.: SMAN-E-673-V1.2 • Desktop Ticket Printer GPT-4633
4.2 Paper insert
The printer is specified for 58 to 82.5 ± 0.5 mm paper
widths and up to 220 µm paper thickness.
4.2.1 Print side
The thermo printer can only print to the thermo sensitive
side of the paper!
The inside of the paper is the printable side. To verify, try
the finger nail test: Quickly run the tip of a finger nail
across the paper, applying pressure. Heat caused by the
friction will result in blackening on the thermo sensitive
side.
4.2.2 Single ticket print
Insert a single ticket from the paper insert side. If the
ticket is narrow, adjust the insert with the slide-in
adjuster.
4.2.3 Slide-in adjuster for paper width
Adjuster for using paper of different widths 58 / 60 /
63.5 / 68 / 76.2 / 82.5 mm.
7
slide-in adjuster
Five different positions are available for the adjuster.
To install the adjuster, slide it in one of the prepared
positions until inner stop. For removal simply pull out the
adjuster.
narrow ticket
4.2.4 Paper holder for paper rolls
A paper roll holder is optionally available. The holder
has two mounting bolts (8). To fix the holder to the
printer insert the bolts in the two mounting hole (9) at
the bottom side of the printer. Slide the printer towards
the holder until the holder snaps in place.
8
9
slide towards untill stop
4.2.4.1 Moving the paper holder
The paper holder has two mounting positions to enable
the use of paper rolls with different roll diameters.
Paper roll size holder position 1 = max. 150 mm
Paper roll size holder position 2 = max. 185 mm
To change axle positions, the holder has to be
disassemled completely before the axle can be
screwed into the new position.
