GeBE-MULDE Mini
GPT-4352(-60)
Please make sure that the power supply cable is run in
such a way that nobody trips over it, and it cannot be
damaged by other devices.
During operation, surfaces in the surrounding area of the
print head may heat up. Therefore, direct contact with the
print head must be avoided to prevent burning accidents.
Do not put heat sensitive objects close to this heat
source.
•
The device may only be opened or repaired by authori-
zed personnel. Never open the device or carry out re-
pairs yourself.
Always contact the GeBE customer service. See
chapter 8.4 GeBE-TECHNICAL SUPPORT, page 18.
•
Before the device is turned on, make sure that the
system voltage of your installation matches the supply
voltage of the device. The device characteristics are
printed on the name plate and in the technical data.
The name plate is located on the underside of the
device. For the technical data of this device, refer to the
chapter 12 TECHNICAL DATA, page 22.
•
Peripheral devices that are connected to the interfaces
and the DC circuits of this device have to meet the re-
quirements (SELV) for low safety voltage (limited pow-
er) in accordance with EN/IEC 60950.
•
Assure, that the printer is protected against overpower
according to EN/IDC 60950.
•
Switching off the device does not completely dis-
connect it from the power supply. Your device is only
disconnected completely, when the power is unplug-
ged.
•
Avoid constant high humidity and condensation. Pro-
tect the device from being splashed and from coming in
contact with chemicals.
•
Only use spare parts and accessories supplied or
authorized by GeBE. The use of unauthorized parts or
accessories may considerably affect the function and
safety of the device and will make all warranty claims
null and void. All supplied parts and original
accessories/spare parts are listed in chapter
4.3 ACCESSORIES AND SPARE PARTS, page 9.
1.3
WARRANTY
We guarantee that all goods supplied by GeBE possess the
warranted features according to the intended use. The
guarantee period for OEM's is 12 months unless other
terms have been agreed upon in writing, and is calculated
from the date of shipment.
1.4
DISCLAIMER OF LIABILITY
We explicitly state that all product liability and guarantee
claims are null and void:
1. if the device has not been used in accordance with
the instructions in this operating manual or hints on
the device itself.
2. if the device has been used outside the intended use,
see chapter 1.5 INTENDED USE, page 5 and chapter
1.6 NON-INTENDED USE, page 5.
3. if the device has been used outside the specifcations
according to CE declaration.
4. if the customer fails to claim an occuring defect
without delay and in writing. Detailed information on
our warranty is part of our terms of delivery and
payment, which can be seen and downloaded at
www.gebe.net (footer: AGB).
5. when opening or operating the device in a state of
error.
6. for attempts by the customer to repair the device.
7. for usage/installation of parts and accessories others
than the manufacturer's original.
8. for damages due to ESD or EOS.
9. for damages due to printing on the wrong paper
(side).
10. for damages through overloading and foreign
influence.
11. for normal wear and tear.
12. for visual defects.
13. for damages through force majeure of any kind.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. GPT-4352-A8-E-SMAN-V1.3-0627
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
May 23, 2018
Beethovenstraße 15
page 4 | 22
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
